Liên hệ tư vấn

0372130774

Thiết Bị Đo Lực Khít Của Nắp Chai Torqo 1600 Non-Destructive Cap Torque Tester

Removal Torque: With a single keystroke, the cap can be removed and reapplied to a designated torque level. The measured values can be stored in the analyzer’s memory.
Incremental Torque: The proper installation of a cap with an internal seal can be verified with this test.
Bridge Torque: This test determines the rotational force required to break the bands that bridge the gap between the cap and the tamper evident band on either an aluminum roll-on cap or a plastic cap.
Reverse Ratchet Torque: This measures the torque required to rotate a child-resistant cap in its free running state.
ROPP (Roll on Pilfer Proof): This test is designed to measure the torque required to open, break the bridges and then strip the threads on a Roll on Pilfer Proof cap.
Close: This selection enables the system to be used as a capping device. When used in this mode the actual closing value can be saved and outputted.
Strip: The strip test is designed to measure the torque required to drive the cap in a clockwise direction (close) in order to break the tamper evident band and remove the cap completely from the product.

Length: 18 in. (45cm)
Width: 13.8 in. (35 cm)
Height: 32 in. (82 cm) 32 in.
Weight: 160 lbs (Ship wt.)
Torque Range In-Lb (N-m): 5 – 200 in-lbs
Accuracy: +/- 0.125% FS on 5-20 in-lbs models, +/- 0.5% FS on 30-200 in-lbs models
Resolution: 1:1000
Speed Range: 1 RPM (1-8 RPM w/ multi-speed option)
Input/Outputs: RS-232 Cable, USB, Ethernet
Voltage: 100/240 VAC, 50/60 Hz
Amperage: 2.0A max
Operation Humidity: up to 90% (non-condensing)
Operation Temperature: 32-100°F (0 – 40°C)
CE Certification: Yes